Description
Optical end stop switch for use in 3D printers and CNC devices. 3-wire cable 50 cm length is included.
Optical end stop switch
2.20лв.
Optical end stop switch for use in 3D printers and CNC devices. 3-wire cable 50 cm length is included.
6 in stock
You may also like…
-
3D and CNC parts
Inductive proximity switch LJ12A3-4-Z/BX
The inductive proximity switch is used in different electronic devices.
Main Parameters:
Dimensions: L – 58mm, diameter 12mm
Detection distance :4mm ± 10%
Set distance:0~3.6mm
This product can be applied to control relays, counters, PLC, etc. -
3D and CNC parts
Stepper motor driver TMC2130 V1.1
Stepper motor driver TMC2130 for us in 3D printers or CNC devices. Ultra quiet, avoid losing steps and jittering, good heat dissipation, with limit switch function.
Micro Plyer: 1/256
Input Voltage: 4.75 – 46.0 V
Motor Voltage: 4.75 – 36.0 V
Driver current: 1.2A, peak 2.0A per phase
Related products
-
3D and CNC parts
MGN12 Linear Rail + MGN12H Carriage
MGN12 Linear Rail slide, length 500 mm + MGN12H carriage. Used for precise linear movement in CNC/3D devices.
Chrome plated rail thickness: 0.015 – 0.02 mm
Dimensions of rail (mm):
L, W, H : 500, 12, 8
D: 6; h: 4,5; d: 3,5; P: 25; E: 10
Dimensions of carriage (mm):
L: 45,4; W: 27; C: 20
Dimensions of assembly (mm):
H: 13; W: 27; N: 7,5; B: … -
3D and CNC parts
LM10UU Linear bearing
LM10UU linear bearing for use with 10mm shaft rod.
Dimensions (mm): L – 29; outside diameter – 19.
Produced in China. -
3D and CNC parts
Lead screw T10, 500mm length, 2 pcs set
Two pcs set trapezoidal lead screw T10, diameter 10mm, 500mm length with brass nuts. Lead 2mm, pitch 2mm.
-
3D and CNC parts
Flexible coupling 5mm/10mm
Flexible shaft 10mm – stepper motor 5mm coupling. The fixing is via clamping pressure applied by two set screws.
Dimensions (mm): L – 30; outside diameter – 25; D1 – 10; D2 – 5.
Material: aluminum
Produced in China.
Reviews
There are no reviews yet.